300 Gallon Vertical Storage Tank
Store Liquids, Chemicals, or Drinking Water
This durable 300 gallon vertical flat top tank is free standing with a flat bottom for indoor or outdoor use.
Translucent for level viewing and equipped with indicators marked in gallon increments
FDA and USDA compliant
Made of linear low density polyethylene with U.V inhibitors
8" diameter fill cap with a 2" bulkhead fitting on the bottom sidewall
Specific gravity 2.0
The Ace Roto-Mold Vertical Tank conforms to the requirements of NSF/ANSI Standard 61 and are FDA and USDA compliant for direct contact with food products.
Capacity 300 Gallon
Weight 86 lbs
Height 80 1/2"
Specific Gravity 2.0
Standards FDA Compliant, NSF Compliant, USDA Compliant
120 Gallon Stackable IBC Tote
Multiple Perks that Stack Up
Use this FDA compliant 120 gallon IBC tote for indoors and outdoors, in non-motion and motion/transportation, and for non-hazardous materials with a specific gravity of 1.5 or less.
Translucent sidewalls and gallon calibration
Stackable tote: 3 high for easily gauging contents
7" diameter vented top fill opening supplied with three 2" threaded fittings on top, side bottom, and top corner for filling and dispensing
Four lift ears for lifting or use the optional 4 way forklift (SKU ST70/120-SK) accessible skid for handling
Leg kits (SKU ST70/120-LG) and drip pans (SKU ST70/120-DT) are also available
NOT DOT Approved. Call your KSCI Customer Service Expert at 1-833-572-3786 for expert help in selecting the correct unit and accessories for your application.
Special fittings available for additional cost. Skid sold separately.
Capacity 120 Gallon
Opening 7" MDPE
Valve 2" MDPE
Weight 77 lbs
Standards FDA Compliant
Stackable Tote Leg Kit
Elevate a stackable tote 24 inches off the floor to make dispensing easy with this leg kit.
Steel 24" leg kit fastens to the corner of the steel skid (SKU ST70/120-SK) with four 3/8" stainless steel bolts
Installed with X bracing on all sides for tote stability
Holds up to 900 lbs
Components: black powder coated mild steel; all stainless steel hardware
Leg kit installation requires a level surface for stability, a hole is provided in the bottom of each leg to allow the stand to be anchored to a suitable hard surface.
Tote and skid sold separately.
Weight 24 lbs