Type II AccuFlow™ Steel Safety Can, 5 Gallon, 1" Metal Hose.

Go beyond protection and compliance with the added convenience of AccuFlow™ with Safe-Squeeze® trigger for safe and controlled pouring.

Justrite's patented manifold and proportional flow-control Safe-Squeeze® trigger provides you the means to regulate the flow rate when handling flammable liquids. Fill port with ergonomic lift lever makes filling easy. Flexible 9" (229-mm) long metal hose spout helps control the pour into small openings.

Made from high-grade coated steel, each can is pressure tested to ensure quality. The tough powder-coat finish resists chemicals and stands up to demands of rigorous use. Stainless steel flame arrester—equipped in all Justrite safety cans—dissipates heat to stop flashback ignition. Sealed lid features automatic positive-pressure relief that vents between 3 and 5 psig (0.2 and 0.35 bar) to protect against explosion. Large label ID zone provides writing space to identity contents, department location, or individual user name. All can sizes have extra capacity for adding two-cycle engine oil or other additives.

Easy-to-fill! Ergonomic lift lever opens the self-closing spout wide for easy filling. A full-length stainless steel flame arrester dissipates heat and allows deeper, secure insertion of the nozzle when filling.

Experience the benefits of Justrite's Type II AccuFlow™ safety cans available in several colors and suitable for the storage of flammable liquids. This helps identify specific liquids, and avoids costly errors when using more than one liquid at a worksite.

Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty.

Model No. 7250130 / 7250230 / 7250330 / 7250430

Type II AccuFlow™ D.O.T. Steel Safety Can, 5 Gallon,1-Inch Metal Hose, Roll Bars.

Compliance with the Department of Transportation's regulations for over-the-road transport of flammables is simpler with Justrite's D.O.T. Compliant AccuFlow™ Safety Can — ideal for remote gas-fueled equipment.

A hold-down bracket tethered to the spout with an easy-to-grasp tightening screw prevents vapor release and spills during transport as required by D.O.T. This fusible link bracket engages easily when used to transport fuel. The fusible link melts at 165°F (74°C) preventing dangerous pressure buildup at elevated temperatures. When the fusible link bracket is disengaged, the can acts as a standard safety can and should not be used for transporting fuel. AccuFlow's™ exclusive Safe-Squeeze® trigger mechanism opens the piston-actuated spout and vacuum-release valve for accurate pouring. A release of the handle instantly closes the valve and guards against spills. Built-in safety features include an internal flame arrester to dissipate heat preventing flashback ignition, a leak-tight, self-closing lid automatically venting between 3 and 5 psig (0.2 and 0.35 bar), and heavy roll bars to protect the spout.

Meets D.O.T. and HM-181 requirements; has United Nations (UN) approved marking 1A1/Y1.2/100 and is an accepted container under CARB.

 

Model No. 7350130 / 7350230

Oval Polyethylene Safety Can For Flammables, Stainless Steel Hardware, Flame Arrester, 1 Gallon.

Space-saving Type I Oval Polyethylene Safety Cans, with stainless steel hardware, increase shelf storage capacity by 30%! The trigger mechanism enables pouring small quantities of liquids. Constructed of high-density polyethylene to stand up to tough acids and corrosives, as well as heat, cans are dent-, puncture-, and chip-resistant. The leak-tight, self-closing cap prevents spillage and automatically vents guarding against explosion. The cap, pressure-relief mechanism and flame arrester work together to prevent ignition sources from entering, without restricting liquid flow in or out of the can. All cans feature stainless steel hardware and flame arrester for superior chemical resistance. White poly cans offer liquid level visibility of dark colored chemicals. FM approved.

Carbon Insert – A patented conductive current-carrying carbon insert is embedded into the rib of containers, completing a ground path between the cover assembly and the flame arrester. When used with a grounding strip, this provides proper grounding and prevents the creation of a static arc during filling or pouring.

Model No. 12162 / 14160